GAS TANK SYSTEM or SMOKE TANK SYSTEM
YOUR CHOICE:
16 OZ.Rectangular or Square $13.95
32 OZ.Rectangular or Square $16.95
64 OZ.Rectangular $19.95
TANK FITTING SETS $8.00 each
Pick-up Clunks: $2.00
Gas (filtered) or Smoke (open end) |
Finally, a complete fuel system for giant
scalers. From a good strong fuel tank to our slip-proof,
leak-proof fittings, your system is now foolproof! Yes,
they really grab your fuel line and keep it connected.
Our fuel tank systems consist of: fuel tank, filter clunk,
fill-vent-outlet tank fittings,
and a length of fuel line. Our smoke fuel system is
the same except the tank clunk is not filtered and the
tank outlet fitting is larger to accommodate our super
smoke pump line. Add our very special
fuselage fittings (fuel vent and fill), you now have
a complete system. No more leaking fuel inside or outside
your model.
EXTRA CAPS:
 |
Dim A |
B |
C |
|
Rect: |
|
| 3.7 |
5.5 |
2.3 |
|
16 oz. |
$2.00 |
| 4.9 |
7.0 |
2.8 |
|
32 oz. |
$2.25 |
| 6.0 |
9.5 |
3.3 |
|
64 oz. |
$2.75 |
| |
| Dim A |
B |
C |
|
Sq: |
|
| 2.9 |
5.8 |
2.9 |
|
16 oz. |
$2.25 |
| 3.7 |
7.2 |
3.7 |
|
32 oz. |
$2.75 |
|
|
FUSELAGE FITTINGS
Standard Size $8.95/set
The standard size was designed to
fill and vent your gas or smoke tanks with a standard thickness
fuselage. |
These vent & fill fittings have screw on
"O" ring sealing caps that allow you to handle,
transport, and store your model without spilling a drop.
EXTRA CAPS:
$2.00 ea. |
NOT AVAILABLE AT THIS TIME
Extra Thick Walls $
14.95/set
At last! A sure fire way to fill and vent fuel tanks in
FOAM FUSELAGES. Designed to fit thick wall fuselages (Byron
Foam, Thick Wall Kits). Our special long fuselage fittings
come complete with hardwood mounts and protective face plate.
|
|
METALON
C-2
FRICTION FIGHTER
8 oz. Bottle (1/2 oz. per gal. of fuel) $12.95
A new breakthrough
in lube technology. Not an additive. Metalon C-2 is a non-solid
conditioner that forms a monomolecular friction shield on metal.
Metalon C-2 conditions all metals, ferrous and nonferrous. It will
not build on itself. Eliminates after run oiling required with methanol-fueled
engines. Thrust dynamometer tests under full load consistently shows
RPM increases of 1-2% (min) and thrust increases of 5-6%.
Metalon C-2 improves performance through reduced friction
and heat; increases engine life through much reduced wear. Speeds
up engine break-in without metal removal. 100% petroleum based,
compatible with synthetic oils.
8 ounces of Metalon C-2 treats 16 gallons of fuel.
|
| RIGHT ANGLE SMOKE TAP
$4.95
This right angle fitting will allow you the flexibility
needed with some smoke system installations. |
 |
|
| "EASY
FLEX" GAS LINE $1.25 per ft.
We carry Aerotrend "Easy Flex" gas and diesel
fuel line. It is extremely flexible and will not become hard with
age. Best of all, it is transparent, allowing you to check for fuel
flow, and it really grabs on to fuel fittings.
|
FLEXIBLE
EXHAUST TUBING $8.95/ft.
This flexible stainless steel exhaust tubing
allows you to route your exhaust as needed. The 5/8"
I.D. is a perfect fit for B&B muffler pipes. Other sizes
available: 3/4" or 1" I.D.
Please specify: 5/8", 3/4" or 1".
NEW!! We now have Neoprene (flexible) exhaust tubing. 5/8" only. $8.95/ft. |
 |
|
 |
SPARK PLUG WRENCH $2.95
NOW 3 SIZES!
#1 - Reg. (most engines)
#2 - G-26, Q300, Sachs 2.0-2.4
#3 - 3W, ZDZ - CM-6 Plug
(Specify #1, #2, or #3)
Here is an inexpensive spark plug wrench ideally suited for
the tight fin design of the Quadra-type engines. Designed to fit
the new Bantam spark plug and Standard plug as well, it will
come in handy at the flying field. |
|
Due to constant product improvements,
B & B Specialties reserves the right to make changes, including
(but not limited to) prices, specifications and accessories without
further notice or obligation. |
