ENGINE MOUNT $25.95
Specify: G38, G45, G62
Q-35, 42, 52
This engine mount is made of high quality cast
aluminum with pre-drilled holes to fit the
Zenoah. Mounting hardware is supplied to fasten
the mount to the engine. This mount will provide
ample clearance, with the firewall, for mounting
the B&B muffler. As an extra bonus, our
spring starter will fit this mount with no
modification. A perfect combination for your
engine.
|
 |
|
 |
B&B E-Z THROTTLE LINKAGE
KITS $9.95
Our E-Z throttle linkage kit is a must for
your engine. It is easy to assemble and provides
E-Z no-bind operation of the throttle. Attaches
to engine mount (as shown).Specify: Fuji 50-A, 86T,
Q35-42, G20-23-26, G38 early, G-38 late, G45,
G62. (G38 LATE model has carb. w/built-in choke.)
G-38
SMOKE TAP $9.95 (in red box)
Now you can add a Smoke System to your G38 the
easy way. Just remove C'case plug and screw in
the new G38 Smoke Tap. Add the B&B Super
Smoke Pumper and Smoke Muffler, and you are ready
for clouds of white billowy smoke.
|
|
ENGINE VIBRATION
ISOLATORS $20.95
Give your model a break with these engine mount
vibration isolators. They cut the high frequency transfer
from the engine to the airframe, while holding the engine
steady. The long bolts go through the mount, Vibra-Loc,
and firewall for secure mounting.
|
SPINNER
ATTACHMENT BOLTS
When ordering, specify engine and spinnerbolt
size:
Q-35-42-52-300-400.... (8-32 or 10-32).... $8.95
U.S. 35-41.... (8-32 or 10-32).... $8.95
Q65-75-100 ..(8-32 or 10-32).....$8.95
Lee Sachs ....(8-32 or 10-32).... $8.95 |
G-38, Early steel hub....(8-32 or 10-32).... $8.95
G-38, Late alum. hub.... (8-32 or 10-32) ... $8.95
G-45, 62, 445, 80..................(8-32 or
10-32) .... $8.95
Fuji 32, 50, 64, 86T.............(8-32 or 10-32) .... $8.95 |
New, longer prop bolt (grade #5) to
compensate for spinner backplate and maintain
same thread engagement in prop hub. Tapped in the
center to accept the attachment bolt supplied. |
|
CUSTOM SPRING STARTERS $55.95
Designed to fit G-38,
FUJI 32, 50, 64, 86T, Q35-42-50-52-400, and U.S. 35-41
Replacement springs $14.95New improved design has a double needle
bearing fore and aft. An aluminum sleeve supports the clutch
bearing. The large, tough spring has a generous tang which
aligns with the engine mounting bolt. Proper mounting hardware
included. Individual replacement parts are readily available.
We also have starters to fit: 3/8" - 10 mm - or 1/2" tail
shafts. Please specify tail shaft diameter.
|
 |
|
 |
B & B ZENOAH SPRING
STARTER $59.95
Specify: G62 or G45
Replacement springs $14.95This new
custom designed Spring Starter, with its stronger
spring, will give you all the power required to
start your Zenoah G62 or G45. It also has a much
larger "Torrington" clutch bearing to
give you years of service.
Lee Sachs 4.2/3.7 Custom Spring Starter $59.95
|
|
HIGH
QUALITY STARTER BEARING GREASE
This modern Super Lubricant is ideal
for repacking spring starter bearings.
Once or twice a year does
it—depending on how often you use
your starter.
1-3/4 oz.
tube.............................. $3.95
|
| SPARK
PLUGS $2.95 RCJ7Y
(BANTAM HEIGHT) FOR MOST ENGINES
RCJ4 (BANTAN HEIGHT) FOR ZENOAH G-23
RCJ8 (REGULAR HEIGHT) FOR ZENOAH G-23
RDJ8J FOR RYOBI, Q300 & SMALL SACHS - $3.50
RZ7C FOR NEW G-26 - $8.95
X82 FOR NEW G-20 - $11.95
New Bantam Height Power Plug offers more power
plus cowling versatility for your engine.
|
 |
|
FUJI-86 TWIN MOUNT $25.95
|
FUJI-32 MOUNT
$19.95
|
Mounts made to clear tail shaft and muffler.
|
Due to constant product
improvements, B & B Specialties reserves the right to
make changes, including (but not limited to) prices,
specifications and accessories without further notice or
obligation.
|
